- Home
- ยป
- Our Products
- »
- Monoblock Pump
Monoblock Pump
2 HP Kirloskar KDS 216 Cast Iron Monoblock Pumps
Product Brochure
Power | 2 HP |
Model Name/Number | KDS 216 |
Brand | Kirloskar |
Material | Cast Iron |
Phase | Single Phase |
Motor Speed | 2800 RPM |
Power Source | Electric |
Voltage | 220V |
Usage/Application | For Water Supply |
Size | 23.5 x 21 x 15 cm |
Color | Blue (Base) |
Weight | 261 g |
JVS VERTICAL OPENWELL PUMPS THREE PHASE 3 HP
Minimum Order Quantity: 28800 Piece
Product Brochure
Power | 3 hp |
Motor Horsepower | NA |
Motor Phase/Stage | Three Phase |
Type | Jet Pump |
Motor Power | 2.2 TO 15KW |
Brand | Texmo |
Motor Phase | Three Phase |
Discharge Outlet Size | NA |
Capacity | 840 LPM |
Power Source | NA |
Motor Speed | NA |
Usage/Application | RURAL WATER SUPPLY |
Voltage | 220 TO 440 |
Maximum Discharge Flow | NA |
Ambient Temperature | NA |
Flow Range | 2.2 TO 15KW |
Frequency | NA |
Material | NA |
Features | NA |
Max Flow Rate | NA |
Head | NA |
Finishing | NA |
Fluid Temperature Range | NA |
Grade Type | NA |
Installation/After Sales Service | NA |
Maximum Head | NA |
Size | NA |
Type Of End Use | NA |
Warranty | 12 MONTHS |
Phase | 3 PH |
Pipe Size | NA |
I Deal In | New Only |
Country of Origin | Made in India |
A JVS vertical openwell pump is a type of submersible pump used for lifting water from open wells or other water sources. The term "JVS" likely refers to a specific brand or manufacturer of these pumps, but without more information, it's challenging to provide specific details about a particular JVS vertical openwell pump model.
Here's a general overview of what you might expect from a typical JVS vertical openwell pump with the specifications you provided:
-
Type: Submersible Pump - These pumps are designed to be submerged in the water source and are suitable for open wells or sumps.
-
Phase: Three-Phase - This means the pump is designed to be powered by a three-phase electrical supply. Three-phase motors are commonly used in industrial and commercial applications.
-
Horsepower (HP): 3 HP - This indicates the power rating of the pump's motor. A 3 HP pump is relatively powerful and can handle a substantial volume of water, making it suitable for various applications, including irrigation, agricultural, and industrial uses.
-
Vertical Design: Vertical openwell pumps are designed to be installed vertically in the well or sump. This design allows them to efficiently pump water from greater depths.
Specific features, dimensions, flow rates, and other technical details can vary depending on the specific model and manufacturer. If you need more detailed information about a particular JVS vertical openwell pump, I recommend contacting the manufacturer or supplier directly or referring to the product documentation that came with the pump.
It's also important to ensure that the pump is properly installed, maintained, and used according to the manufacturer's recommendations for optimal performance and longevity.
Additional Information:
- Delivery Time: 3 DAYS
- Packaging Details: ALL
KDS GMC THREE PHASE MONOBLOCK PUMP 0.5HP MODEL KDS-0510
Minimum Order Quantity: 1 Piece
Product Brochure
Power | 0.5 HP |
Model Name/Number | KDS-0510+ |
Brand | Kirloskar |
Material | NA |
Phase | Three Phase |
Product Type | NA |
Motor Speed | NA |
Maximum Discharge Flow | Less than 100 LPM |
Power Source | Electric |
Maximum Head | Less than 15 m |
Warranty | 12 months |
Discharge Outlet Size | Less than 25 mm |
Usage/Application | COOLING TOWERS |
Fluid Temperature Range | NA |
Max Flow Rate | NA |
Sealing | NA |
Color | BLUE |
Design | NA |
Full Load Current A | NA |
Country of Origin | Made in India |
As of my last knowledge update in January 2022, I don't have specific information about the "KDS GMC Three Phase Monoblock Pump 0.5HP Model KDS-0510." Product models and specifications can change, and new products may have been released since then.
If you're looking for information about this specific pump model, I recommend checking the official website of the manufacturer, contacting the manufacturer directly, or referring to the product documentation that came with the pump. Manufacturers typically provide detailed specifications, features, and other relevant information about their products.
If you have specific questions about pump selection, installation, or maintenance, feel free to ask, and I'll do my best to provide general information and guidance based on the knowledge available up to my last update.
Additional Information:
- Delivery Time: 3 DAYS
- Packaging Details: ALL
SP COUPLED SET ENERGY EFFICIENT PUMPSET WITH IE5 MOTOR THREE PHASE 1HP MODEL SP-0
Minimum Order Quantity: 1 Piece
Product Brochure
Power | 0.5 HP |
Power Source | Electric |
Engine Type | NA |
Engine Horsepower | NA |
Product Type | NA |
Motor Phase | Three Phase |
Drainage Plug Assembly | NA |
Full Load Current | NA |
Type Of End Use | Industrial |
Automation Grade | Automatic |
Voltage | 415+-10% |
Color | GOLDEN |
Frequency | NA |
Features | ULTRA PREMIUM EFFICIENCY |
Installation/After Sales Service | NA |
Pump Size | NA |
Material | NA |
Motor Speed | NA |
Pressure | NA |
Country of Origin | Made in India |
It seems like you're referring to a specific model of an energy-efficient pump set with an IE5 motor. However, as of my last knowledge update in January 2022, I don't have information on specific product models or releases beyond that date.
If "SP COUPLED SET" refers to a brand or a specific product line, I recommend checking the manufacturer's website or contacting the manufacturer directly for the most up-to-date and accurate information on the SP-0 model with a 1HP IE5 motor.
IE5 is a high-efficiency class of electric motors defined by the International Electrotechnical Commission (IEC). These motors are designed to be very energy-efficient and are often used in applications where minimizing energy consumption is a priority.
For specific details about the SP-0 model, such as specifications, features, and pricing, it's best to refer to the product documentation provided by the manufacturer or get in touch with their customer support. If there have been any updates or new releases since my last update in January 2022, the manufacturer's website would be the most reliable source of informatioN.
Additional Information:
- Delivery Time: 3 DAYS
- Packaging Details: ALL
DC HASTI PUMBA PUZHA SINGLE PHASE MONOBLOCK PUMPS 0.5HP MODEL DC-0M
Minimum Order Quantity: 1 Piece
Product Brochure
Power | 0.5 HP |
Model Name/Number | DC-0M |
Brand | Kirloskar |
Material | NA |
Phase | Single Phase |
Product Type | NA |
Motor Speed | NA |
Maximum Discharge Flow | Less than 100 LPM |
Power Source | Electric |
Maximum Head | Less than 15 m |
Warranty | 12 months |
Discharge Outlet Size | Less than 25 mm |
Usage/Application | FOUNTAINS |
Fluid Temperature Range | NA |
Max Flow Rate | NA |
Sealing | NA |
Color | BLACK |
Design | NA |
Full Load Current A | NA |
Head Size Metre | NA |
Motor Type | NA |
Pump Type | NA |
Tank Capacity | NA |
Voltage Range Volt | NA |
Current | NA |
Frequency | NA |
Winding | NA |
Weight | NA |
Dimensions | NA |
Head Range | NA |
Pump Size | NA |
Fuel Consumption | NA |
Engine Cooling Method | NAA |
Method Of Starting | NA |
Grade Of Oil | NA |
Oil Sump Capacity | NA |
Liquid Temperature | NA |
Operating Pressure | NA |
Over Load Tripping Arrangement | NA |
Speed | NA |
Thermal Overload Protector | NA |
Impeller | NA |
Pump Casting | NA |
Pump Shaft | NA |
Motor Insulation Class | NA |
Installation/After Sales Service | Yes |
Country of Origin | Made in India |
It seems like you've provided information about a specific single-phase monoblock pump. Here's a breakdown of the details you've mentioned:
- Brand: DC Hasti Pumba Puzha
- Type: Monoblock Pump
- Model: DC-0M
- Power: Single-phase, 0.5 HP (Horsepower)
If you have specific questions about the DC-0M monoblock pump or if there's more information you're looking for, please provide additional details or clarify your inquiry. If you have specific technical specifications or operational details you're interested in, feel free to mention them for more targeted assistance
Additional Information:
- Delivery Time: 2 TO 4 PM
- Packaging Details: ALL
KOSI SINGLE PHASE OPENWELL SUBMERSIBLE PUMPS 0.5 HP MODEL KOSI-0520
Minimum Order Quantity: 1 Piece
Product Brochure
Power | 0.5 hp |
Motor Phase/Stage | Single Phase |
Discharge Range | 30-60 LPM |
Number Of Stages | Single-stage Pump |
Brand | Texmo |
Type | Water Filled |
Motor Phase | Single Phase |
Maximum Discharge Flow | 100 - 500 LPM |
Country of Origin | Made in India |
It seems you've provided information about a specific single-phase open-well submersible pump. Here's a breakdown of the details you've mentioned:
- Brand: KOSI
- Type: Open-Well Submersible Pump
- Model: KOSI-0520
- Power: Single-phase, 0.5 HP (Horsepower)
If you have specific questions about the KOSI-0520 open-well submersible pump or if there's more information you're looking for, please provide additional details or clarify your inquiry. If you have specific technical specifications or operational details you're interested in, feel free to mention them for more targeted assistance.
Additional Information:
- Delivery Time: 2 TO 4 PM
- Packaging Details: ALL
KS7 17.5CM BOREWELL SUBMERSIBLE PUMPS 6HP THREE PHASE MODEL KS7P-0602
Minimum Order Quantity: 1 Piece
Product Brochure
Power | 1 HP |
Size | 4 Inch |
Discharge Range | 30-60 LPM |
Number Of Stages | Single-stage Pump |
Type | Borewell |
Motor Phase | Single Phase |
Head | 15 to 50 m |
Maximum Discharge Flow | Less than 100 LPM |
Usage/Application | RRAL WATER SUPPLY |
Country of Origin | Made in India |
The KIRLOSKAR 6 HP Three Phase 6 Stage Borewell Submersible Pump Set is a vital and highly efficient piece of equipment designed to extract water from deep underground sources such as boreholes, wells, and reservoirs. Widely used in agriculture, irrigation, residential water supply, and various industrial applications, this submersible pump set is an essential tool for ensuring a reliable and consistent water supply, even from deep, subterranean sources. One of the standout features of the Borewell Submersible Pump Set is its ability to operate submerged in the water source it's extracting from. This submersible design eliminates the need for priming and ensures that the pump can draw water effectively even from great depths. The pump is typically placed at the bottom of the well or borehole, where it efficiently pushes water to the surface. These pump sets are engineered to provide excellent water delivery performance, capable of delivering water at a consistent pressure and flow rate. They are designed to handle a wide range of flow requirements, making them suitable for both domestic and commercial applications. Some models are equipped with variable speed drives, allowing users to adjust the pump's speed and output to match specific water demand. Efficiency is a key advantage of the Borewell Submersible Pump Set. They are designed to minimize energy consumption while maximizing water output. This not only reduces operational costs but also helps conserve energy and resources. Durability and reliability are essential in submersible pumps, given their challenging operating environments. These pump sets are typically constructed from corrosion-resistant materials, ensuring long-lasting performance even in corrosive or harsh water conditions. Additionally, they often feature thermal protection mechanisms and overload protection to prevent damage due to overheating or electrical issues. Ease of maintenance is another consideration in the design of these pump sets. Many models are designed for easy installation and maintenance, with features such as quick-disconnect fittings and accessible components. In conclusion, the Borewell Submersible Pump Set is an indispensable tool for accessing water from deep underground sources efficiently and reliably. Its submersible design, efficient operation, durability, and ease of maintenance make it a valuable asset in agriculture, irrigation, residential water supply, and various industrial applications. Whether you need a consistent water supply for your crops, household, or industrial processes, this pump set is a dependable solution that ensures access to water even from great depths.
Buy CRI Delma 6 HP Three Phase 6 Stage Borewell Submersible Pump Set online in India at wholesale rates. If you have been looking for CRI Delma 6 HP Three Phase 6 Stage Borewell Submersible Pump Set dealers, your search ends here as you can get the best CRI Delma 6 HP Three Phase 6 Stage Borewell Submersible Pump Set distributors in top cities such as Delhi NCR, Mumbai, Chennai, Bengaluru, Kolkata, Chennai, Pune, Jaipur, Hyderabad and Ahmedabad. You can purchase CRI Delma 6 HP Three Phase 6 Stage Borewell Submersible Pump Set of the finest quality and rest assured to get the best in terms of both durability and performance. If you are bothered about the CRI Delma 6 HP Three Phase 6 Stage Borewell Submersible Pump Set prices, you can be totally sure to get the best rates as Industrybuying brings you genuine CRI Delma 6 HP Three Phase 6 Stage Borewell Submersible Pump Set rates and quality assured products only from the best of brands with exclusive brand discounts you won’t find anywhere else. Procure CRI Delma 6 HP Three Phase 6 Stage Borewell Submersible Pump Set today and avail the best offers on your purchase.
Additional Information:
- Delivery Time: 2 TO 4 PM
- Packaging Details: ALL
JVS VERTICAL OPENWELL PUMPS 3HP THREE PHASE MODEL JVSA 0502
Product Brochure
Power | 0.5 hp |
Motor Horsepower | NA |
Type | Horizontal |
Motor Phase/Stage | Three Phase |
Motor Power | NA |
Brand | Texmo |
Motor Phase | Three Phase |
Discharge Outlet Size | NA |
Capacity | NA |
Country of Origin | Made in India |
- Wide Voltage Design
- Design to Prevent Overloading
- High Efficiency and Energy Saving Design
- Dynamically Balanced Rotating Parts
- Advanced Water Cooled Motors Designs
- Wide Voltage Motor Designs
- Easy Maintainable Designs
- High Head Applications
Additional Information:
- Delivery Time: 2 TO 4 PM
- Packaging Details: ALL
KDT THREE PHASE MONOBLOCK PUMPS MODEL KDT-544 5HP
Minimum Order Quantity: 1 Piece
Product Brochure
Power | 5 HP |
Model Name/Number | KDT-544 |
Brand | Kirloskar |
Material | NA |
Phase | Three Phase |
Product Type | NA |
Motor Speed | NA |
Maximum Discharge Flow | Less than 100 LPM |
Power Source | Electric |
Country of Origin | Made in India |
It seems like you're referring to a specific model of a three-phase monoblock pump, the KDT-544, with a 5 HP motor. However, I don't have specific information on this particular model, as my training only includes general knowledge up to January 2022, and I don't have the ability to browse the internet for real-time information.
If you have specific questions about the KDT-544 pump, I recommend reaching out to the manufacturer or the supplier from whom you purchased the pump. They should be able to provide you with detailed specifications, operating instructions, and any other relevant information specific to that model.
Additionally, you may check the product documentation, user manual, or labels on the pump itself for more information about its features, specifications, and usage guidelines. If you have technical questions or need assistance with the installation and operation of the pump, contacting the manufacturer's customer support or consulting with a professional in the field may be helpful.
SRF THREE PHASE MONOBLOCK PUMPS MODEL SRF-2570 25HP
Minimum Order Quantity: 1 Piece
Product Brochure
Power | 10 HP |
Model Name/Number | SRF-2570 |
Brand | Kirloskar |
Material | NA |
Phase | Three Phase |
Product Type | NA |
Motor Speed | NA |
Maximum Discharge Flow | Less than 100 LPM |
Power Source | Electric |
Country of Origin | Made in India |
It seems like you're referring to a specific pump model, the SRF-2570, which is a three-phase monoblock pump with a 25 HP (Horsepower) rating. However, without more detailed information or specifications, it's challenging to provide specific details about this particular pump model.
Monoblock pumps typically refer to pumps where the motor and pump are integrated into a single unit. Three-phase pumps are designed to operate with three-phase electrical power.
If you have specific questions about the SRF-2570 pump, such as performance specifications, dimensions, features, or application details, I recommend checking the manufacturer's documentation or contacting the manufacturer directly. They should be able to provide you with detailed information about the pump's capabilities and how to best use it for your specific needs.
KPP KIRLOSKAR SWIMMING POOL PUMPS SINGLE PHASE MODEL KPP-1600 2HP
Minimum Order Quantity: 1 Piece
Product Brochure
Power | 2 HP |
Power Source | Electric |
Engine Type | NA |
Engine Horsepower | NA |
Product Type | NA |
Motor Phase | Single Phase |
Drainage Plug Assembly | NA |
Full Load Current | NA |
Type Of End Use | Industrial |
Country of Origin | Made in India |
- Thermal Overload Protection
- Built in Thermal Overload Protection for Motor
- Pre filter basket
- Built in pre filter basket for easy cleaning of swimming pool water and to separate hair
- and lint. Large wrench on lid for easy removal for cleaning and positive sealing
- Quiet Operation
- Self Priming
- No Need to Prime. Can start delivering instantaneously.
- Lightweight and Compact design
- Constructed with special grade engineering materials such as Glass Filled
- Polypropylene for strength, compact designs for ease of handling and
- installation.
- Mechanical Seal
- True Carbon face seal for reliability and trouble free operation. Easy to replace
- and maintain.
- Dynamically balanced rotating parts
- All rotating parts are dynamically balanced which ensures minimum vibrations, and
- protect components from damages during the pumps operations, resulting trouble free
- operations with higher outputs.
KDS SINGLE PHASE MONOBLOCK PUMPS MODEL KDS 314 3HP
Minimum Order Quantity: 1 Piece
Product Brochure
Motor Horsepower | 6-10 HP |
Power | 2 HP |
Model Name/Number | KDS 314 |
Brand | Kirloskar |
Material | NA |
Phase | Single Phase |
Product Type | NA |
Motor Speed | NA |
Maximum Discharge Flow | 100 - 500 LPM |
Country of Origin | Made in India |
3 Hp single-phase Kirloskar monobloc pumps comprise a flatter efficiency curve for efficient operation. These heavy-duty monobloc water pumps can withstand voltage fluctuations ranging from 180 to 240 volts. Our monobloc water pumps are perfectly suited for applications like gardening and small farm irrigation, lawn sprinklers, water supply for high-rise buildings & water transfer and circulation.
Key Features
- High Efficiency & Energy Saving Design - This monobloc pump has a higher output at lesser operating cost and longer life
- Design to Prevent Overloading - Protects from overloading & trouble free operations for the years
- Wide Voltage Design - This monobloc pump has the capacity to operate from 180 to 240 volts
- Automatic Air Release- Automatically releases air when the pump starts which ensures swifter and smoother operations
- CED coating - Provides 5 times more protection from corrosion over conventional painting
DC HASTI PUMBA PUZHA SINGLE PHASE MODEL DC-3M 5 HP
Minimum Order Quantity: 1 Piece
Product Brochure
Power | 5 HP |
Model Name/Number | DC-3M |
Brand | Kirloskar |
Material | NA |
Phase | Single Phase |
Product Type | NA |
Motor Speed | NA |
Maximum Discharge Flow | 501-1000 LPM |
Power Source | Electric |
Country of Origin | Made in India |
It seems like you've provided information about a specific single-phase monoblock pump. Here's a breakdown of the details you've mentioned:
- Brand: DC Hasti Pumba Puzha
- Type: Monoblock Pump
- Model: DC-0M
- Power: Single-phase, 0.5 HP (Horsepower)
If you have specific questions about the DC-0M monoblock pump or if there's more information you're looking for, please provide additional details or clarify your inquiry. If you have specific technical specifications or operational details you're interested in, feel free to mention them for more targeted assistance
KDI FIRE MONOBLOCK PUMP THREE PHASE MODEL KDI-520 EE4 5HP
Minimum Order Quantity: 1 Piece
Product Brochure
Power | 5 HP |
Model Name/Number | KDI-520 EE4 |
Brand | Kirloskar |
Material | NA |
Phase | Three Phase |
Product Type | NA |
Motor Speed | NA |
Maximum Discharge Flow | 100 - 500 LPM |
Power Source | Electric |
Country of Origin | Made in India |
operationsThree-phase Kirloskar monobloc pumps comprise a flatter efficiency curve for efficient operation. These 5 Hp dynamic monobloc pumps can withstand voltage fluctuations ranging from 350 to 440 volts. Our monobloc pump is perfectly suited for industrial applications for handling clear water at high pressures and for other water-handling applications in air-conditioning and refrigeration systems, cooling towers and firefighting systems.
Key Features
High Efficiency & Energy Saving Design - Higher output at lesser operating cost and longer life
Design to Prevent Overloading - Protects from overloading & trouble free operations for the years
Wide Voltage Design - The pump has the capacity to operate from 350 to 440 volts.
Automatic Air Release- Automatically releases air when the pump starts which ensures swifter and smoother
operations
CED Coating - Provides 5 times more protection from corrosion than conventional painting.
Superior Mechanical Seal - Superior quality of mechanical seal ensures zero leakage, lower friction loss and protects from wearing of the shaft, thus resulting in easy maintenance and longer life.
CED Coating - Provides 5 times more protection from corrosion than conventional painting.
GMC FIRE MONOBLOCK PUMP THREE PHASE MODEL GMC-134 1 HP
Minimum Order Quantity: 1 Piece
Product Brochure
Power | 1 HP |
Model Name/Number | GMC-134 |
Brand | Kirloskar |
Material | NA |
Phase | Three Phase |
Product Type | NA |
Motor Speed | NA |
Maximum Discharge Flow | 501-1000 LPM |
Power Source | Electric |
Country of Origin | Made in India |
- Impeller: Cast Iron/Bronze/Noryl
- Delivery Casing: Cast Iron
- Motor Body: Cast Iron
- Pump Shaft: Carbon Steel/Stainless Steel
- Sealing: Mechanical Seal
Material Of Construction
Flatter Efficiency Curve
Minimum variations in efficiency during entire operating range increases the utility of pumpset for variable conditions.
Wide Voltage Design
The motor is designed to withstand wide voltage fluctuations from 350 to 440 volts and reduces motor burning in case of low voltage.
Designed to Prevent Overloading
Lesser chances of motor burning as the motor does not get overloaded even if the pump is operated at a head lower than recommended, thus ensuring substantial cost savings due to low maintenance and breakdown.
Replaceable Wearing Parts
All wearing parts within the pumps are easily accessible and replaceable which facilitates ease of maintenance thereby extending the life of the pump.
Dynamically Balanced Rotating Parts
Minimum vibrations protect components from damages during the operations, thus ensuring consistent performance as concentricity is maintained.
CED – Cathodic Electro Deposition
CED is the latest coating technology for corrosion resistance with uniform coating. It provides 5 times more protection over conventional painting, resulting in longer life. All major CI parts of Kirloskar pumps coming in contact with the water are CED coated. Automatic Air Release
Automatically releases air when the pump starts which ensures swifter and smoother operations, thus eliminating the necessity of operating air release cock and ensures swifter and smoother operations.
High Efficiency And Energy Saving Design
Innovative design manufactured at state-of-the-art plant, delivers optimum efficiency at lower energy consumption resulting in significant cost savings.
Applications
- Air conditioning and refrigeration systems
- Cooling towers
- Clear water handling at high pressure in industries
- Irrigation in horticulture & agriculture
- Fire fighting systems
KDT FIRE MONOBLOCK PUMP THREE PHASE MODEL KDT-2095+ 20HP
Minimum Order Quantity: 1 Piece
Product Brochure
Power | 10 HP |
Model Name/Number | KDT-2095+ |
Brand | Kirloskar |
Material | NA |
Phase | Three Phase |
Product Type | NA |
Motor Speed | NA |
Maximum Discharge Flow | 501-1000 LPM |
Power Source | Electric |
Country of Origin | Made in India |
- Flatter Efficiency Curve - Minimum variations in efficiency during entire operating range increases the utility of pumpset for variable conditions.
High Head Applications - The pump has been designed to deliver large volumes of water for high head applications, helping customers to achieve high turnaround time and productivity. - Wide Voltage Design - The motor is designed to withstand wide voltage Variation from 300 to 440 volts and reduces motor burning in case of low/high voltage.
Designed to Prevent Overloading - Lesser chances of motor burning as it does not get overloaded even if the pump is operated at a head lower than recommended, thus ensuring substantial cost saving due to low maintenance and breakdown. - Replaceable Wearing Parts - All wearing parts within the pumps are easily accessible and replaceable which facilitates ease of maintenance thereby extending the life of the pump.
- Dynamically Balanced Rotating Parts - Minimum vibration protects the components from damage during the operation, thus ensuring consistent performance as concentricity is maintained.
- CED – Cathodic Electro Deposition - CED is the latest coating technology for corrosion resistance with uniform coating. It provides 5 times more protection over conventional painting, resulting in longer life. All major CI parts of Kirloskar pumps coming in contact with the water are CED coated.
- Automatic Air Release - Automatically releases air when the pump starts ensuring swifter and smoother operations, thus eliminating the necessity of operating air release cock.
- High Efficiency and Energy Saving Design - Innovative design manufactured at state-of-the-art plant, delivers optimum
KIRLOSKAR FIRE MONOBLOCK PUMP MODLE KDI-852 7.5HP THREE PHASE
Minimum Order Quantity: 1 Piece
Product Brochure
Power | 7.5 HP |
Motor Horsepower | 3 HP |
Material | Cast Iron |
Motor Speed | 1200 RPM |
Maximum Discharge Flow | 500 LPM |
Brand | Kirloskar |
Model Name/Number | KDI-852 |
Power Source | Electric |
Maximum Head | 50 m |
Country of Origin | Made in India |
- Air conditioning and refrigeration systems
- Cooling towers
- Clear water handling at high pressure in industries
- Irrigation in horticulture & agriculture
- Fire fighting systems
KIRLOSKAR FIRE PUMP 100 HP THREE PHASE MODEL DB80/26
Minimum Order Quantity: 1 Piece
Product Brochure
Material | Cast Iron |
Part | Fire Hydrant pumps |
Usage/Application | Industrial |
Coating | Stainless Steel |
Capacity (lpm) | 3783 lpm |
Power Source | Electric |
Max Flow Rate | NA |
Head (meters) | 88 METER |
Maximum Inlet Pressure (Bar) | NA |
Model Name/Number | DB80/26 |
Product DescriptionWe are engaged in offering Kirloskar CPHM End Suction Pump to our clients. Our range of all products is widely appreciated by our clients.
Havells self priming monoblock pump AL2 0.5hp single phase
Product Brochure
Power | 0.5 HP |
Phase | Single Phase |
Pump Type | Centrifugal Pump |
Discharge Pressure | 500 LPH |
Max Flow Rate | 200 LPM |
Suc x Del (mm) | 13 mm x 13 mm |
Brand | Havells |
Colour | Grey |
Material | Aluminium |
Style | water pump |
Product Dimensions | 32L x 14W x 21H Centimeters |
Power Source | Corded Electric |
Item Weight | 8250 Grams |
Maximum Flow Rate | 1600 Liters Per Hour |
Voltage | 180 Volts |
Havells self priming monoblock pump A1 1hp single phase
Product Brochure
Power | 1 HP |
Phase | Single Phase |
Discharge Pressure | 1000 LPH |
Max Flow Rate | 500 LPM |
Suc x Del (mm) | 25 mm x 25 mm |
- Used in gardening,farmhouses&building construction
- Forlifting watert overhead storage tanks
- Pressure booster systems
- Hotels,hospitals and fountains
- Water circulation in Industries
Havells self priming monoblock pump JSE1 1HP single phase
Product Brochure
Power | 1 HP |
Phase | Single Phase |
Pump Type | Centrifugal Pump |
Discharge Pressure | 1000 LPH |
Max Flow Rate | 500 LPM |
Suc x Del (mm) | 25 mm x 25 mm |
Havells Shallow Well Jet Pump JSE1 is heavy duty, intensive, industrial use for pumping water from shallow wells. It is made of high-quality material, making it sturdy and durable. This jet pump also has a good power factor, overload protection, motor overload protection and a tripping feature, ensuring the safe operation of the pump. Designed to function efficiently in situations with low water pressure, this pump also saves energy by maximising water transfer efficiency.
Havells self priming deep well jet pump BWJ11T 1HP single phase
Product Brochure
Power | 1 HP |
Phase | Single Phase |
Discharge Pressure | 1000 LPH |
Max Flow Rate | 500 LPM |
Suc x Del (mm) | 32 mm x 25 mm x 25 mm |
The Havells Deep Well Jet Pump BWJ11T is available in a variety of specifications and models to suit a range of applications. It is designed as an efficient life-saver for deep water wells with low heads & large capacities within the stipulated discharge range. This deep well jet pump from Havells gives you high efficiency and low power, making it ideal for home use. Featuring a discharge range of 1800L/h to 320L/h and a maximum lift of 40m, this deep well pump will serve your needs perfectly.
SILVER DEWATERING MONOBLOCK PUMP SINGLE PHASE MODEL SDM-16 2HP
Minimum Order Quantity: 1 Piece
Motor Horsepower | 2 HP |
Motor Horsepower(HP) | 2 HP |
Material | Cast Iron |
Motor Speed | 2800 RPM |
Maximum Discharge Flow | 5000 LPM |
Model Name/Number | SDM-16 |
Power Source | Electric |
Maximum Head | 100 m |
Country of Origin | Made in India |
It sounds like you're describing a dewatering monoblock pump. Here's the breakdown:
- Brand: Silver
- Type: Dewatering monoblock pump
- Phase: Single-phase
- Model: SDM-16
- Horsepower: 2 HP
So, this is a single-phase dewatering monoblock pump from Silver, model SDM-16, with a horsepower rating of 2 HP.
Havells self priming monoblock pump BOOM2 0.5hp single phase
Product Brochure
Power | 0.5 HP |
Phase | Single Phase |
Pump Type | Centrifugal Pump |
Max Flow Rate | 200 LPM |
Suc x Del (mm) | 25 mm x 25 mm |
- Motor body: High quality Aluminum extruded with plastic cannopy
- 50Hz single phase AC power Supply
- Energy Efficient Motor Motors are with F Class Insulation, which ensures that motor does't get burned and works smoothly even at high temperatures.
- Pump Performance Higher performance of the pumps. Pumps have higher suction power and give high discharge in its operating range.
- in built thermal overload protector (T.O.P.)
- CED coated Cast Iron Hydraulic Parts for Corrosion free performence
- Carbon Steal shaft, Pump Casting cast Iron FG200
- Water transfer for Apartments, bungalows, farm-houses, building construction, gardening, fountains, overhead storage tanks, pressure booster systems, hotels, hospitals, industrial water circulation
HAVELLS SELF PRIMING MONOBLOCK PUMP HS2 0.5HP SINGLE PHASE
Product Brochure
Power | 0.5 HP |
Pump Type | Centrifugal Pump |
Phase | Single Phase |
Discharge Pressure | 500 LPH |
Max Flow Rate | 200 LPM |
Suc x Del (mm) | 25 X MM 25 MM |
Havells HI-FLOW HS2 0.5HP Single Phase Centrifugal Pump is made of cast iron and it has been designed with a high-pressure die-cast CI body. The motor body is painted with blue epoxy powder which makes it corrosion-resistant. The motor features SS 410 shaft coupled with the impeller on an epoxy-coated aluminium hub and stainless steel shaft. The pump is single phase 50 Hz and has a 2900 rpm motor speed. It comes with 1-year warranty for parts and labour. Are you looking for a good-quality centrifugal pump? Havells Hi-Flow HS2 0.5HP Single Phase Centrifugal Pump, MHPAVE0X50 has a tungsten carbide rotor, cast iron casing and impeller with cast iron volute etc which makes it last longer. The single-phase centrifugal pump for domestic use. The high-pressure die-cast CI motor body of this single-phase pump is made of special material which contributes to its good heat-resistant performance. It is mounted on a flange with a ceramic sealing ring, preventing the introduction of sand into the liquid. All are power-saving, easy and convenient to operate.
KIRLOSKAR FIRE MONOBLOCK PUMP MODLE KDI-1348 12.5HP THREE PHASE
Product Brochure
Power | 10 HP |
Motor Horsepower | 3 HP |
Material | Cast Iron |
Motor Speed | 2800 RPM |
Maximum Discharge Flow | 1000 LPM |
Brand | Kirloskar |
Model Name/Number | KDI-1348 |
Power Source | Electric |
Maximum Head | 50 m |
Country of Origin | Made in India |
- High Efficiency & Energy Saving Design - Higher output at lesser operating cost and longer life
- Design to Prevent Overloading - Protects from overloading & trouble free operations for the years
- Wide Voltage Design - The pump has the capacity to operate from 350 to 440 volts.
- Automatic Air Release- Automatically releases air when the pump starts which ensures swifter and smoother
operations - CED Coating - Provides 5 times more protection from corrosion than conventional painting.
- Superior Mechanical Seal - Superior quality of mechanical seal ensures zero leakage, lower friction loss and protects from wearing of the shaft, thus resulting in easy maintenance and longer life.
KIRLOSKAR FIRE PUMP 56HP THREE PHASE MODEL KFE2606
Product Brochure
Motor Horsepower | 3 HP |
Power | 10 HP |
Material | Cast Iron |
Motor Speed | 3500 RPM |
Maximum Discharge Flow | 5000 LPM |
Brand | Kirloskar |
Model Name/Number | KFE2606 |
Power Source | Electric |
Maximum Head | 100 m |
Country of Origin | Made in India |
Kirloskar Fire Engine Pump Set - KFE
Kirloskar is a leading firefighting pump manufacturer provider of complete fire pump sets, drivers, controllers and accessories. The KFE series pump sets are exclusive firefighting engine pump sets designed for fire application.
KBL’s pump sets adhere to the latest standards, including the National Building code (India) and TAC. All the Kirloskar Fire Engine Pump Sets are built and packaged in KBL’s plant governed by Integrated Management System (IMS) as per ISO 9001: 2015, ISO 14001:2015, ISO 45001: 2018 and ISO 50001:2018.
With KFE single point responsibility of the pumpset lies with KBL. The customer need not follow-up with multiple agencies for commissioning and service of the pumpsets.
KS8 20CM BOREWELL SUBMERSIBLE PUMPS THREE PHASE MODEL KS8D-1506 15HP
Minimum Order Quantity: 1 Piece
Product Brochure
Power | 3 HP |
Size | 7 Inch |
Discharge Range | 100-150 LPM |
Number Of Stages | Single-stage Pump |
Type | Borewell |
Motor Phase | Three Phase |
Head | 51 to 100 m |
Maximum Discharge Flow | 1001 - 5000 LPM |
Usage/Application | RURAL WATER SUPPLY |
Country of Origin | Made in India |
KIRLOSKAR FIRE PUMP MODEL KDI -520
Minimum Order Quantity: 1 Piece
Product Brochure
Power | 3 HP |
Motor Horsepower | 3 HP |
Material | Cast Iron |
Motor Speed | 1000 RPM |
Maximum Discharge Flow | 1000 LPM |
Model Name/Number | KDI 520 |
Power Source | Electric |
Maximum Head | 50 m |
Country of Origin | Made in India |
Kirloskar is a well-known Indian multinational corporation that specializes in engineering products and services. They manufacture a wide range of industrial equipment, including pumps, valves, and engines.
Fire pumps are essential components of fire protection systems. They are designed to supply water at a high pressure to firefighting sprinkler systems or standpipe systems. The specifications and features of a particular model, such as the KDI-520, would be provided by Kirloskar or its official distributors.
To get detailed and up-to-date information about the Kirloskar Fire Pump Model KDI-520, I recommend reaching out directly to Kirloskar or their authorized dealers. They can provide you with the specific technical details, performance characteristics, and any other relevant information about the pump model you are inquiring about. You may also refer to the product documentation, manuals, or specifications that accompany the pump.
SILVER DEWATREING MONOBLOCK PUMPSINGLE PHASE 1 HP MODEL SDM-15
Minimum Order Quantity: 1 Piece
Motor Horsepower(HP) | 1 HP |
Motor Horsepower | 2 HP |
Material | Cast Iron |
Motor Speed | 1200 RPM |
Maximum Discharge Flow | 1000 LPM |
Model Name/Number | SDM-15 |
Power Source | Electric |
Maximum Head | 50 m |
Country of Origin | Made in India |
a Silver Dewatering Monoblock Pump with a single-phase 1 HP motor, model SDM-15.
This type of pump is typically used for dewatering applications where there's a need to remove water from an area, such as flooded basements, construction sites, or industrial facilities. The monoblock design means that the pump and motor are integrated into a single unit, making it compact and easy to install.
With a 1 HP motor, this pump should be capable of handling moderate to heavy-duty dewatering tasks, depending on factors such as the depth of water and the distance it needs to be pumped
KIRLOSKAR FIRE PUMP MODELKDS 1575
Product Brochure
Power | 10 HP |
Motor Horsepower | 3 HP |
Material | Cast Iron |
Motor Speed | 1200 RPM |
Maximum Discharge Flow | 1000 LPM |
Brand | Kirloskar |
Havells Self Priming Monoblock Pump
Minimum Order Quantity: 5 Piece
Product Brochure
Power | 1 HP |
Pump Type | Centrifugal Pump |
Brand | Havells |
Material | Aluminum Body |
Phase | Single Phase |
Product Type | Monoblock Pump |
Power Source | Electric |
Warranty | 18 months |
Voltage | 240 V |
Centrifugal Monoblock Pump
Product Brochure
Power | 9 HP |
Model Name/Number | NA |
Brand | Kirloskar |
Material | NA |
Product Type | NA |
NW/NWD END-SUCTION PUMPS SINGLE PHASE 5HP
Minimum Order Quantity: 27500 Piece
Product Brochure
Flow Rate | 51-100 m3/hr |
Model Name/Number | NW1+ /NW1D |
Head | 44 M |
Size | NA |
Usage/Application | RURAL WATER SUPPLY |
Speed | NA |
Material | NA |
Voltage | NA |
Noise | NA |
Type Of End Use | NA |
Power Supply Ac | NA |
Pump Sizes | NA |
Range | NA |
Speed At 60 Hz | NA |
Reservoir Capacity | NA |
Accuracy | NA |
Color | GREEN |
Reservoir Volume | NA |
Protection Class | NA |
Safe Overload | NA |
Temperature Compensated | NA |
Pump Size | NA |
Temperature Operating | NA |
Features | NA |
Capacity | NA |
Discharge Pressure | NA |
Horizontal Suction Pump | NA |
Power Rating Single Phase | NA |
Pressure | NA |
Products Type | NA |
Brand | JES |
Country of Origin | Made in India |
The term "NW/NWD end-suction pumps" typically refers to a type of centrifugal pump used for various fluid transfer applications. These pumps are commonly used in industrial, commercial, and municipal settings for tasks such as water supply, HVAC systems, and general liquid transfer. The specific features and characteristics can vary depending on the manufacturer and model. Here's a breakdown of the information you provided:
-
Type: End-Suction Pumps - These pumps have an inlet on one end and an outlet on the other. They are designed for simple and efficient liquid transfer, and they are often used for various water and fluid handling applications.
-
Phase: Single Phase - This indicates that the pump is designed to be powered by a single-phase electrical supply. Single-phase motors are commonly used in residential and light commercial applications.
-
Horsepower (HP): 5 HP - This specifies the power rating of the pump's motor. A 5 HP pump is relatively powerful and suitable for applications where a significant flow rate or pressure is required.
Specific details about the NW/NWD end-suction pump, such as flow rate, head (pressure), and other technical specifications, would depend on the particular model and manufacturer. You would need to refer to the manufacturer's documentation or contact the manufacturer or supplier directly for more precise information about the pump's performance, dimensions, and features.
Proper installation, maintenance, and usage in accordance with the manufacturer's guidelines are essential to ensure the pump's optimal performance and longevity.
Is this conversation helpful so far?Additional Information:
- Delivery Time: 3 DAYS
- Packaging Details: ALL
KSMB STAINLESS STEEL MONOBLOCK PUMPSETS THREE PHASE 1 HP MODEL KSMB 129
Minimum Order Quantity: 1 Piece
Product Brochure
Max Flow Rate | Upto 10 LPM |
Power | 2 HP |
Model Name/Number | KSMB 129 |
Brand | Kirloskar |
Material | NA |
Phase | Three Phase |
Product Type | NA |
Motor Speed | NA |
Maximum Discharge Flow | Less than 100 LPM |
Power Source | Electric |
Maximum Head | 15 to 50 m |
Warranty | 12 months |
Discharge Outlet Size | 25 to 50 mm |
Usage/Application | FOOD PROCESSING |
Fluid Temperature Range | NA |
Sealing | NA |
Color | SLIVER & BLACK |
Design | NA |
Full Load Current A | NA |
Head Size Metre | NA |
Motor Type | NA |
Pump Type | NA |
Tank Capacity | NA |
Voltage Range Volt | NA |
Current | NA |
Frequency | NA |
Winding | NA |
Weight | NA |
Dimensions | NA |
Head Range | NA |
Pump Size | NA |
Fuel Consumption | NA |
Engine Cooling Method | NA |
Method Of Starting | NA |
Grade Of Oil | NA |
Oil Sump Capacity | NA |
Liquid Temperature | NA |
Operating Pressure | NA |
Over Load Tripping Arrangement | NA |
Speed | NA |
Thermal Overload Protector | NA |
Impeller | NA |
Pump Casting | NA |
Pump Shaft | NA |
Motor Insulation Class | NA |
Country of Origin | Made in India |
It looks like you've provided information about a specific stainless steel monoblock pump set. Here's a breakdown of the details you've given:
- Type: Stainless Steel Monoblock Pump Sets
- Model: KSMB 129
- Power: Three-phase, 1 HP (Horsepower)
If you have specific questions about the KSMB 129 pump set or if there's more information you're looking for, please provide additional details or clarify your inquiry. Additionally, if you have specific technical specifications or operational details you're interested in, feel free to mention them for more targeted assistance.
Additional Information:
- Delivery Time: 2 TO 4 PM
- Packaging Details: ALL
NW/NWD END SUCTION PUMPS SINGLE PHASE 5.7 HP MODEL NW1+/NW1D
Minimum Order Quantity: 1 Piece
Product Brochure
Flow Rate | Upto 50 m3/hr |
Model Name/Number | NW1+/NW1D |
Head | 44 M |
Size | NA |
Usage/Application | RURAL WATER SUPPLY |
Type Of End Use | NA |
Pump Sizes | NA |
Speed At 60 Hz | NA |
Accuracy | NA |
Color | GREEN |
The term "NW/NWD end-suction pumps" typically refers to a type of centrifugal pump used for various fluid transfer applications. These pumps are commonly used in industrial, commercial, and municipal settings for tasks such as water supply, HVAC systems, and general liquid transfer. The specific features and characteristics can vary depending on the manufacturer and model. Here's a breakdown of the information you provided:
-
Type: End-Suction Pumps - These pumps have an inlet on one end and an outlet on the other. They are designed for simple and efficient liquid transfer, and they are often used for various water and fluid handling applications.
-
Phase: Single Phase - This indicates that the pump is designed to be powered by a single-phase electrical supply. Single-phase motors are commonly used in residential and light commercial applications.
-
Horsepower (HP): 5 HP - This specifies the power rating of the pump's motor. A 5 HP pump is relatively powerful and suitable for applications where a significant flow rate or pressure is required.
Specific details about the NW/NWD end-suction pump, such as flow rate, head (pressure), and other technical specifications, would depend on the particular model and manufacturer. You would need to refer to the manufacturer's documentation or contact the manufacturer or supplier directly for more precise information about the pump's performance, dimensions, and features.
Additional Information:
- Delivery Time: 2 TO 4 PM
- Packaging Details: ALL
KSMB STAINLESS STEEL MONOBLOCK PUMPSET THREE PHASE MODEL KSMB 116 1.0HP
Minimum Order Quantity: 1 Piece
Product Brochure
Power | 1 HP |
Max Flow Rate | 26-50 LPM |
Model Name/Number | KSMB 116 |
Brand | Kirloskar |
Material | NA |
Phase | Three Phase |
Product Type | NA |
Motor Speed | NA |
Maximum Discharge Flow | 100 - 500 LPM |
Country of Origin | Made in India |
Havells high flow sewage pump HSXB20-05 0.5 HP
Product Brochure
Power | 0.5 HP |
Discharge Range | 200 LPM |
Motor Phase | Single Phase |
Maximum Discharge Flow | 500 LPM |
Country of Origin | Made in India |
The Havells HSXB20-05 0.5 HP Sewage Submersible Pump is a robust and efficient solution designed for the effective removal of sewage and wastewater. With its powerful 0.5 HP motor, this submersible pump is well-suited for residential and commercial applications where the reliable disposal of sewage is essential.
The submersible design allows the pump to be immersed directly in the sewage or wastewater, ensuring efficient pumping without the need for priming. The 0.5 HP motor provides sufficient power to handle the challenges of sewage pumping effectively. This makes the HSXB20-05 suitable for applications such as draining basements, sewage systems, and handling wastewater in various settings.
The pump's construction is designed for durability and longevity, capable of withstanding the corrosive and abrasive nature of sewage. The submersible nature of the pump enhances its safety and efficiency, eliminating the need for a separate pump room.
In summary, the Havells HSXB20-05 0.5 HP Sewage Submersible Pump is a reliable and powerful solution for sewage and wastewater disposal. It offers efficient pumping performance, durability, and safety, making it an ideal choice for residential and commercial applications where the effective handling of sewage is paramount.
Havells high flow sewage pump HSXD35-10 1HP
Product Brochure
Power | 1 HP |
Motor Horsepower | 1 HP |
Discharge Range | 1000 LPM |
Number Of Stages | Multi Stage Pump |
Motor Phase | Single Phase |
Maximum Discharge Flow | 500 LPM |
Country of Origin | Made in India |
The Havells HSXD35-10 1 HP Sewage Submersible Pump is a powerful and reliable solution designed for efficient sewage and wastewater removal. With its substantial 1 HP motor, this submersible pump is well-suited for residential, commercial, and industrial applications where the effective disposal of sewage is crucial.
The submersible design allows the pump to be immersed directly in sewage or wastewater, ensuring efficient pumping without the need for priming. The 1 HP motor provides significant power, enabling the pump to handle large volumes of sewage effectively. This makes the HSXD35-10 suitable for applications such as sewage systems, drainage systems, and wastewater treatment plants.
The pump's construction is engineered for durability and longevity, capable of withstanding the corrosive and abrasive nature of sewage. The submersible nature of the pump enhances safety and efficiency, eliminating the need for a separate pump room. The robust design and powerful motor ensure reliable performance in demanding conditions.
CROMPTON AQUAGOLD SERIES SELF PRIMING REGENERATIVE PUMPS 1HP SINGLE PHASE
Minimum Order Quantity: 1 Piece
Power | 1 HP |
Pump Type | SELF PRIMING |
Brand | CROMPTON |
Material | Steel |
Discharge Pressure | 25X25 MM |
Color | Blue |
Phase | Single Phase |
Max Flow Rate | NA |
Power Source | Electric |
Country of Origin | Made in India |
"Crompton Aquagold Series Self Priming Regenerative Pumps 1HP Single Phase." To get the most accurate and up-to-date information, I recommend checking the latest details from Crompton or their authorized distributors.
For information on this specific pump model, you can visit the official Crompton website, contact their customer support, or reach out to local distributors. They should be able to provide you with the latest specifications, features, and any other relevant details about the Aquagold Series Self Priming Regenerative Pumps with 1HP and single-phase configuration.
User reviews and ratings on e-commerce platforms or industry forums may also offer insights from individuals who have used the product. Keep in mind that product details and availability can change, so it's crucial to refer to the most recent information provided by the manufacturer or authorized dealers.
View More