- Home
- ยป
- Our Products
- »
- Automatic Escalator
Automatic Escalator
Jes Automatic Pump Control Jes 10 Apc 10hp Single Phase
Minimum Order Quantity: 1 Piece
Brand | JES |
Capacity | 2400 persons / hour |
Speed | NA |
Model Name/Number | NA |
Step Width | 800 mm |
Inclination | 35 Degree |
Operational Environment | NA |
Usage/Application | Office / Workspaces |
Product Type | NA |
Automation Grade | Automatic |
Warranty | 12 months |
Duty Cycle | 10-15 Hrs/Day |
the JES 10 APC (Automatic Pump Control) 10HP Single Phase pump control system. However, I can provide you with some general information on pump control systems and considerations.
Automatic Pump Control (APC) systems are devices designed to automate the operation of pumps for various applications. They typically monitor water levels or pressure and control the pump to maintain desired levels. Here are some common features you might find in such a system:
Pressure or Level Sensors: APC systems often include sensors to measure water pressure or levels. These sensors provide feedback to the control system.
Control Panel: The control panel is the central component that houses the control unit and interface. Users can set parameters and monitor the system through this panel.
Start/Stop Functionality: The APC system should be capable of automatically starting and stopping the pump based on the water pressure or level readings.
Motor Protection: Pump control systems typically include features to protect the pump motor from issues like overheating or electrical faults.
Single Phase Power: Single-phase power indicates that the system is designed to work with a single-phase electrical supply. This is common in residential or small-scale applications.
Horsepower (HP): The system you mentioned has a 10HP (horsepower) capacity, indicating the power of the pump motor. This is a substantial horsepower rating, suitable for applications requiring a higher flow rate or lift.
If you're specifically looking for information on the JES 10 APC 10HP Single Phase pump control system, I recommend checking the product manual, contacting the manufacturer, or visiting their official website for the most accurate and up-to-date information. Additionally, you may find specifications and user reviews from distributors or retailers selling the product.
JES AUTOMATIC PUMP CONTROL 1.1HP SINGLE PHASE
Minimum Order Quantity: 1 Piece
Power | 600W |
Usage/Application | Pressure Booster System |
Voltage | 12 V DC |
Brand | JES |
Maximum Fluid Temperature | 45 Degree C |
Maximum Flow Rate | 42 L/min |
Maximum Output Pressure | 10 bar |
Accessories | NA |
Frequency | NA |
Features | NA |
- automatic pump controller is a sensor to automate your pump, you have to attach on water pump (as shown in the image) and fit together near loft tank to generate more pressure in your taps, showers etc.
- PCB circuit is of an OMRON brand ( made in malaysia)
- maximum pressure is 10bar....pressure depends on the horse power of the pump.
- easy to install, two wires are connected,connect lower wire to pump and upper wire to main plug
- If after installation pump does not turn off then...........1. check any leakage in the pipe line or taps, single drop leakage will not turn off the pump......2. please fix one non return valve in the inlet of pump.